Best Water Source Heat Pump 2024

Key Features:

Key Features:

• This water source heat pump is for a shopper who wants endless on-demand hot water that is always consistent. The water temperature is constantly monitored and controlled to ensure maximum efficiency.
• This is a tankless electric water heater that is 90% smaller than traditional tank heaters. It can be installed on a wall or at the point of use. The dimensions are 11.5 x 8 x 3.75 inches.
• The EcoSmart tankless electric water heater is a highly efficient water heater that only heats water when it is called for, as opposed to a tank heater that maintains water temperature even when not in use. This can save the shopper a significant amount of energy, as well as money on their energy bill.
• This is a tankless electric water heater that is ideal for providing hot water for a bathroom, small sink, office breakroom, or other low-flow applications. It provides 1.3-3.1 gallons per minute depending on the inlet water temperature.

Key Features:

• The water source heat pump is a convenient way to get hot water, as it is a small tank that can fit under your sink and provides hot water on demand. It is also very efficient, with a thermal efficiency of 98%.
• This water heater is easy to maintain and has a long lifespan.
• This water source heat pump can be installed independently or in line with a large hot water source. It has a 36-37″ cord that plugs into a 120-volt outlet.
• A water source heat pump is a device that uses a small amount of energy to transfer heat from one place to another. In this case, the heat pump is used to transfer heat from the water source (usually a groundwater or surface water source) to the shopper’s home. The heat pump does this by circulating a refrigerant through a loop of tubing. The refrigerant picks up heat from the water source and transfers it to the home, where it is used to heat the air or water.
• This water heater is easy to install, can be mounted on a shelf, wall, or floor, and only needs to be connected to a cold water line to provide hot water.

Key Features:

• This heat pump will not sell your personal information to third parties.
• The Sensi smart thermostat is an energy-efficient water source heat pump that can help save money on heating and cooling costs. It features flexible scheduling, remote access, and usage reports to help you keep track of your energy usage and save money.
• This water source heat pump is designed for easy installation by the average shopper. It comes with a built-in level and step-by-step instructions via an app. It is also compatible with HVAC equipment found in most homes and does not require a common wire (c-wire) in most applications.
• This is a water source heat pump that is designed to be efficient and easy to maintain. It comes with a Sensi monitoring system that keeps track of performance and efficiency, as well as provides alerts and reminders for maintenance tasks like filter replacement.
• This water source heat pump is simple to configure and has a traditional thermostat design. It is easy to install and fits in the same space as a traditional thermostat.

Key Features:

• This water source heat pump is for a shopper who wants to upgrade their old thermostat. This new thermostat is easy to install and is compatible with most old thermostats.
• This is a water source heat pump that can be used to heat or cool a space. It is non-programmable, meaning that you cannot set it to turn on or off at specific times.
• This water source heat pump is designed to be used with heat pump systems, central gas, and oil furnaces, or electric furnaces. It can help to improve the efficiency of your heating system by using the heat from the water source to help heat your home.
• This water source heat pump cannot be used with electric baseboard heat or in an RV.
• The water source heat pump has an accurate temperature control of +/-1-Degree F for consistent comfort. The room temperature display range is 41°F to 95°F, and the temperature control range is 44°F to 90°F.
• This water source heat pump is designed to either prolong or shorten the temperature open time, depending on the desired effect. It can also help reduce energy usage and annual heating and cooling costs.
• This is a water source heat pump that has room temperature calibration adjustment, and 5-minute compressor delay protection (Selectable on or off), with an air filter change reminder and low battery indicator available.
• The water source heat pump has a 4.5 sq. inch display with a white backlight, which is easy to see and read. It also has a large, clear backlit digital display, which is very suitable for middle-aged and elderly people.
• This water source heat pump is dual-powered by either a battery or hardwire 24Vac power and has an easy access battery compartment.
• This water source heat pump comes with a 2-year worry-free warranty and 24h customer service for peace of mind. It is a great choice for those who want a reliable and efficient heat pump to heat their home.

Key Features:

• This water source heat pump is designed to provide endless hot water on demand. It is continuously monitored for water temperature and flow rate to ensure efficiency and consistent performance.
• This is a small, efficient water heater that can be installed on a wall or at the point of use. It is 90% smaller than traditional tank heaters, and only 17x17x3.75 inches in size.
• This water source heat pump is a tankless electric water heater that is 99% thermal energy efficient. It only heats water when called, unlike a tank heater that maintains water temperature even when not being used. It can save up to 50% in water heating costs according to the Department of Energy.
• The EcoSmart ECO 27 is a water source heat pump that is sized according to the provided sizing map. It requires a 3×40 AMP Double Pole Breaker and a 27-kilowatt tankless electric water heater. It is ideal for providing hot water for whole-home applications and can provide between 2.7 and 6.5 gallons per minute depending on the inlet water temperature.
• The manufacturer of this water source heat pump offers a limited lifetime warranty on the electronics, exchanger, and element of the product. The heat pump is UL-499 certified and ETL Listed.
• A water source heat pump is a type of heat pump that uses water instead of air to source heat. This particular heat pump requires three 40 amp double pole breakers in order to function properly.
• This water source heat pump is recommended for use with a 200-amp electrical panel. It is designed to efficiently transfer heat from a water source to a desired location.
• The ECOSMART tankless water heater is a water source heat pump that provides an endless supply of hot water. It is a highly efficient unit that can save you money on your energy bills.
• The water source heat pump is a space-saving device that can save up to 12 cubic feet of storage space. It is a great choice for those who want to save space in their home or office.
• This water source heat pump has a digital temperature control that allows users to set the temperature in 1-degree increments. This gives users complete control over the hot water temperature, making it easy to find the perfect setting for their needs.

Key Features:

• This water source heat pump is a non-self-priming pump that can circulate water at a maximum temperature of 80 degrees Celsius or 176 degrees Fahrenheit. It is submersible but cannot be immersed in hot water. The maximum flow rate is 800 liters per hour or 210 gallons per hour. The maximum lift height is 5 meters or 16 feet.
• This water source heat pump has a 1/2″ male thread on the pump and comes with brass hose fittings. The OD of the brass coupler is 3/8”(10mm). The plug type is 2.1mm x 5.5mm female.
• This water source heat pump is ETL certified, meaning that it meets safety standards. It comes with a DC 12V power supply adapter and has a rated current of 2A.
• The water source heat pump is a small, efficient, and quiet pump that can be used for a long time. It has a brushless motor and is entirely waterproof.
• This water source heat pump can be used for a variety of purposes, including circulating water in a pool, aquarium, or fish tank, or in a solar or hydroponic system. It can also be used to circulate hot water in a home or greenhouse.

Key Features:

• The pump is designed to circulate water from a natural source, such as a pond, through a heat exchanger in order to heat or cool a home. The timer allows the homeowner to set how long the pump should run, while the adapters and rubber washers provide a snug fit for different types of valves. The sensor valve is included to help regulate the flow of water and protect against overheating. Finally, the two 12-inch supply lines provide an adequate supply of water to the heat exchanger.
• This is a water source heat pump that is 120 volts and 8.5 pounds. It is overall 6.2 x 6 x 5 inches.
• This is a water source heat pump that provides hot water at every faucet or shower when needed and helps eliminate wasted water.
• The water source heat pump easily installs to existing plumbing and is maintenance-free. It is an efficient and environmentally friendly way to heat your home.
• A water source heat pump is a device that is used to transfer heat from one source to another. It is typically used to transfer heat from a water source to a home or office. The pump has a timer that can be programmed to activate the pump when needed.

Key Features:

Key Features:

• This is a water source heat pump that uses a circulation pump to move water. The pump is not self-priming, so it will need to be primed before it can be used. The pump has a maximum flow rate of 2.1 gallons per minute and a maximum discharge head of 9.8 feet.
• This water source heat pump has a 1/2″ male thread and an OD of 10mm. The plug type is 2.1mm x 5.5mm female.
• This water source heat pump is a DC 12V unit that comes with an AC 110v to DC 12v power adapter. It has a brushless motor and is rated for a service life of 30000 hours. It is also low noise, rated at 30db at 1 meter.
• This water source heat pump is designed for circulating water up to 55°C/131°F, and can be submerged but should not be immersed in water hotter than 50°C/122℉.
• This means that if your water source heat pump breaks within the first year, the company will send you a new one without you having to return the old one.