If you have an HVAC system in your home, then you’ve probably heard about the importance of changing the filters regularly. But if you suffer from allergies or asthma, you may be wondering if regular filters are enough to protect you from mold.
One of the biggest concerns with HVAC systems is that they can spread mold throughout the home. Since HVAC systems distribute heated or cooled air to various rooms throughout the house, the units often sit in one spot in one room, which can promote mold growth.
But the best HVAC filter for mold can help prevent that. Not only will a good filter help prevent dust, dander, and pet hair from getting into the air you breathe, but it can also prevent small particles of mold from spreading throughout your home.
Top 10 HVAC Filter For Mold (Based on Our Research)
Our Editor’s Best Hvac Filter For Mold Reviews
BNX 20x20x1 MERV 13 Air Filter 4 Pack – MADE IN USA – Electrostatic Pleated Air Conditioner HVAC AC Furnace Filters – Removes Pollen, Mold, Bacteria, Smoke
Key Features:
- This is a 20x20x1 MERV 13 air filter replacement for your air conditioner, furnace or HVAC system. Actual Size: 19 11/16’’ x 19 11/16’’ x 3/4‘’. Comparable with MPR 1500-1900 & FPR 10. Electrostatically charged filter media with industry leading low air flow resistance.
- This filter is made in the USA and is sustainable. It is made from recycled cardboard and reduces environmental waste.
- The BNX MERV 13 100% synthetic electrostatically charged air filter media is a high-performance hvac filter that outperforms standard fiberglass filters. It adopts the latest in electrostatic filtration technology to allow for industry leading superior low air flow resistance while maintaining the highest grade level of filtration.
- The BNX air filter has a MERV 13 rating, allowing it to capture 93% of microscopic airborne particles (3-10 um) without impacting air flow. It captures microscopic particles such as virus-carriers, bacteria, odors, smoke, and pollen, pet dander, allergens, dust, lint, mold, dust mites, smog. There is noticeably cleaner air in 48 hours.
- This hvac filter for mold is made in America with high quality standards.
Related Read: Best Reusable HVAC Filter
Ventilaider Complete Air Vent Filter Set 20″ x 84″ Electrostatic Media With 126″ of Installation Tape 35+ Filters per Roll for HVAC, AC & Heating Intake Registers & Grilles to Reduce Dust and Allergy
Key Features:
- The hvac filter for mold is an electrostatic non-woven polyester fabric that is designed to trap and remove mold spores from the air.
- This is an air filter that is effective at trapping mold spores. It is made of thin polyester fabric that allows for more airflow than other materials like cheesecloth or gauze.
- The hvac filter for mold is a great value because it comes with a 20 inch x 84 inch roll of filter media and 128 inches of installation strip. This can cover over 36 standard vents. Inexpensively cover nonstandard larger sized vents.
- This hvac filter is designed to be cut to fit any size vent, and includes an installation strip. It can also be used for window coverings and other unconventional problems.
- If you’re looking for an HVAC filter that specifically targets mold, this Ventilaider option might be a good fit. It comes with a 100% money-back guarantee, so you can try it out risk-free.
BNX 14x25x1 MERV 8 Air Filter 4 Pack – MADE IN USA – Electrostatic Pleated Air Conditioner HVAC AC Furnace Filters – Removes Dust, Mold, Pollen, Lint
Key Features:
- This is a MERV 8 air filter replacement for your air conditioner, furnace or HVAC system. It has a low air flow resistance and is electrostatically charged.
- This is an hvac filter for mold that is made in the USA and is sustainably made from recycled cardboard.
- This is an air filter designed to trap mold spores and other airborne contaminants. It is made of synthetic materials and has a high level of filtration.
- The BNX air filter is a MERV 8 rated filter, meaning that is it effective at capturing 85% of microscopic airborne particles. This includes common allergens such as dust, pet dander, dust mites, and mold. You can expect to see a noticeable difference in air quality within 48 hours of installation.
- This HVAC filter is for mold and is made in America with American workers. It is made with the latest automated manufacturing processes and technology with the strictest quality standards.
BNX 20x25x1 MERV 13 Air Filter 3 Pack – MADE IN USA – Electrostatic Pleated Air Conditioner HVAC AC Furnace Filters – Removes Pollen, Mold, Bacteria
Key Features:
- This is a MERV 13 air filter that is 20x25x1 in size. It is electrostatically charged and has low air flow resistance.
- This hvac filter for mold is made in the USA and is sustainably made from recycled cardboard.
- This is a high-quality hvac filter that is designed to capture mold spores and other airborne particles. It is made of 100% synthetic materials and uses electrostatic filtration technology to provide superior filtration with low air flow resistance.
- The BNX air filter has a MERV 13 rating, which means that it can capture 98% of airborne particles without impacting air flow. It is effective at capturing microscopic particles such as virus-carriers, bacteria, odors, smoke, and pollen, as well as larger particles such as pet dander, allergens, dust, lint, and mold.
- The hvac filter for mold is a BNX quality product that is made in America with American workers. It is made with the latest automated manufacturing processes and technology with the strictest quality standards.
BNX 20x20x1 MERV 8 Air Filter 4 Pack – MADE IN USA – Electrostatic Pleated Air Conditioner HVAC AC Furnace Filters – Removes Dust, Mold, Pollen, Lint
Key Features:
- This is an air filter that is designed to trap mold spores and other allergens in order to improve the air quality in your home. It is 20x20x1 inches in size and has a MERV 8 rating, which means it is effective at trapping smaller particles. The filter is also electrostatically charged, which helps it to attract and trap allergens.
- This is an air filter that is designed to remove mold from the air. It is made in the USA from recycled cardboard.
- This hvac filter is for mold and is made of 100% synthetic materials. It is electrostatically charged, which allows for superior low air flow resistance while maintaining a high level of filtration.
- This is an air filter that is designed to capture microscopic particles in the air, such as mold, dust, and dust mites. It has a MERV 8 rating, which means it can capture 85% of these particles without impacting air flow. You should notice cleaner air in your home within 48 hours of using this filter.
- This is an HVAC filter that is designed to trap mold spores and keep them from circulating through your home. It is made in the USA with high-quality materials and strict quality standards.
Filtrete 16x25x1, AC Furnace Air Filter, MPR 2200, Healthy Living Elite Allergen, 6-Pack (exact dimensions 15.69 x 24.69 x 0.78)
Key Features:
- The hvac filter for mold is a 3-month pleated 1 in. home air filter that outperforms fiberglass, washable, and non-electrostatic filters for your furnace, air conditioner, or HVAC system.
- The Filtrete Brand 3-in-1 technology is designed to trap unwanted air particles and allow cleaner air to flow through. This hvac filter is ideal for use in rooms where there is a lot of mold or for people who are allergic to mold.
- This HVAC filter for mold is designed to attract and capture microscopic particles such as smoke, cough and sneeze debris, bacteria and viruses, as well as large particles such as lint, household dust and pollen.
- The 2200 MPR has a MERV 13 rating, which means it is effective at capturing smaller particles like mold spores.
- This hvac filter for mold is designed to capture a variety of airborne particles from the air passing through it. The higher the MPR, the more particles the filter will capture.
Related Read: Best Hepa Air Filter For Hvac
Filterbuy 20x20x1 Air Filter MERV 13 Optimal Defense (4-Pack), Pleated HVAC AC Furnace Air Filters Replacement (Actual Size: 19.50 x 19.50 x 0.75 Inches)
Key Features:
- This is a 20x20x1 replacement air filter for your furnace, air conditioner, heat pump, or HVAC system. It is designed to remove mold from the air, and it is the actual size of 20x20x1.
- This hvac filter for mold is made of MERV 13 synthetic media, which is comparable to MPR 1500 – 1900 & FPR 10. It is designed to trap 98% of airborne particles without impacting air flow, which will protect homes from bacteria and other airborne particles.
- The hvac filter for mold is made of high quality materials that are designed to last three times longer than other brands. It also has an electrostatically charged design that captures more harmful particles.
- This HVAC filter is designed to trap mold spores and other airborne contaminants. It features a durable, industrial-grade frame and dual wire backings for added strength and durability.
- If you’re looking for an HVAC filter that is specifically designed to capture mold spores, this one from FilterBuy might be a good option. It’s made entirely in the United States from recyclable materials, so you can feel good about your purchase.
BNX 16x25x1 MERV 13 Pleated Air Filter – Made in USA – Electrostatic Charged HVAC AC Furnace Filters – Removes Pollen, Mold, Bacteria, Smoke (2 Pack)
Key Features:
- This is a MERV 13 air filter, which is a replacement for your air conditioner, furnace or HVAC system. The actual size of the filter is 15 11/16’’ x 24 11/16’’ x 3/4’’. The filter is comparable with MPR 1500-1900 & FPR 10. The filter media is electrostatically charged with low air flow resistance.
- The hvac filter for mold is made in the USA and is sustainably made from recycled cardboard. It has a single sided (one-piece) frame technology to reduce environmental waste.
- This is a high-quality air filter that uses the latest electrostatic technology for superior performance. It has a low air flow resistance and is able to filter out a high level of particles.
- This hvac filter is designed to capture 98% of airborne particles, including viruses, bacteria, smoke, pollen, and dust mites, without impacting air flow.
- The BNX Quality Promise is a commitment to delivering the highest quality American made safety products, made with American workers, and using the latest automated manufacturing processes and technology with the strictest quality standards.
BNX 16x25x1 MERV 13 Air Filter 6 Pack – MADE IN USA – Electrostatic Pleated Air Conditioner HVAC AC Furnace Filters – Removes Pollen, Mold, Bacteria
Key Features:
- This hvac filter is designed to replace your air conditioner, furnace or HVAC system’s filter. It is the actual size of 15 11/16” x 24 11/16” x 3/4”. This filter is comparable with MPR 1500-1900 & FPR 10. This filter has electrostatically charged filter media with low air flow resistance.
- This hvac filter for mold is made in the USA, and is made from recycled cardboard. It is a one-piece frame, which reduces environmental waste.
- This is an air filter that is designed to remove mold from the air. It is made of synthetic material that is electrostatically charged, which allows it to trap mold particles and remove them from the air.
- This hvac filter for mold is for a shopper who wants to capture 98% of airborne particles without impacting air flow. It captures microscopic particles such as virus-carriers, bacteria, odors, smoke, and pollen, pet dander, allergens, dust, lint, mold, dust mites, smog.
- The BNX Quality Promise is a commitment to delivering the highest quality American made safety products, made with American workers, and using the latest automated manufacturing processes and technology with the strictest quality standards.
BNX 16x25x1 MERV 13 Air Filter 3 Pack – MADE IN USA – Electrostatic Pleated Air Conditioner HVAC AC Furnace Filters – Removes Pollen, Mold, Bacteria
Key Features:
- This is a MERV 13 air filter that is 16x25x1. It is electrostatically charged and has low air flow resistance.
- This HVAC filter is made in the USA from recycled cardboard, using a single-sided frame to reduce environmental waste.
- This hvac filter for mold is made of 100% synthetic electrostatically charged air filter media, which is better than standard fiberglass filters. It uses the latest in electrostatic filtration technology to allow for industry leading superior low air flow resistance while maintaining the highest grade level of filtration.
- This hvac filter is designed to capture 98% of airborne particles, including microscopic particles such as virus-carriers, bacteria, odors, smoke, pollen, pet dander, allergens, dust, lint, mold, dust mites, and smog. It has a MERV 13 rating, which means it won’t impact air flow, making it a great choice for those who are looking for an effective way to improve indoor air quality.
- This is an HVAC filter that is designed to trap mold spores and other allergens in order to protect the air quality in your home.
Related Read: Best HVAC Filter For Dust
HVAC Filter For Mold FAQs
1. What are the benefits of using an HVAC filter for mold?
There are many benefits of using an HVAC filter for mold. Some of these benefits include:
- HVAC filters can help to remove mold spores from the air, which can help to reduce the amount of mold in your home.
- HVAC filters can also help to trap mold spores, which can prevent them from being able to spread throughout your home.
- HVAC filters can also help to keep mold from coming back after it has been removed.
- HVAC filters can also help to reduce the number of allergens in your home, which can be helpful for people who are allergic to mold.
- HVAC filters can also help to improve the air quality in your home, which can be beneficial for your overall health.
2. How does an HVAC filter for mold work?
Mold spores are often found in the air, and they can cause respiratory problems for some people. An HVAC filter for mold can help to remove these spores from the air, and this can improve the air quality in a home or office.
3. What types of HVAC filters are available for mold?
There are a few different types of HVAC filters that are available for mold. Some of the most popular options include pleated filters, activated carbon filters, and HEPA filters.
4. How often should an HVAC filter for mold be replaced?
HVAC filters for mold should be replaced every three months.
5. What are the risks associated with using an HVAC filter for mold?
There are no risks associated with using an HVAC filter for mold.
Conclusion
There are many great HVAC filters for mold on the market. Our list of the best HVAC filter for mold will help you save time researching and choosing the best one for you.