When your furnace is running, it pulls warm air from the rooms near it and pumps it through the ducts to the rest of the house. The air gets cooler as it travels through the ducts and it meets the cold air coming in through the windows. When the warm air meets the cold air, there is a small amount of moisture in the air that’s cooled, and that moisture condenses on the cooler ductwork, dripping down onto the floor. A small amount of condensate is normal and can be easily wiped up, but when there’s a large amount of water dripping, it’s a good indication that something’s wrong.
Read on to learn why there’s so much water on the floor and how to get rid of it.
Why is there so much water on the floor?
If your furnace is near a window, then there’s a good chance that the condensate is dripping onto the floor near it. If your furnace is in the middle of the house, then it’s likely that you’re finding water near the ductwork in different rooms.
The amount of water and where it’s coming from depends on a couple of things.
Our Editor’s Best Condensate Pump For Furnace Reviews
Little Giant VCMA-20ULS 115 Volt, 80 GPH, 1/30 HP Automatic Condensate Removal Pump with Safety Switch, White/Black, 554425
Key Features:
-
This condensate pump for furnace is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers. It features a vertical-type switch to reduce footprint.
-
The condensate pump for furnace has a high performance motor that is thermally protected and fan-cooled. The motor is CSA listed in the USA and Canada.
-
This condensate pump is built to last, with a stainless steel motor shaft and thermal overload protected motor. It is CSA certified to US and Canadian standards.
-
This condensate pump has a safety switch that can be used to shut down the air conditioner condensate if there is a possibility of the tank overflowing.
-
This condensate pump is designed for furnaces and can move up to 80 gallons per hour. It has a maximum shut-off of 20 feet and can handle pressures up to 8.7 PSI. It also has 3 inlet drain holes and a 6-foot cord. The maximum temperature it can handle is 140 degrees Fahrenheit.
Little Giant VCMA-15UL 65 GPH 1/50 HP Automatic Condensate Removal Pump (no safety switch), Black/White, 554401
Key Features:
-
This condensate pump is designed to remove water from furnaces. It features a 1/2-gallon ABS plastic tank and a 6-foot power cord. The 1/50 HP pump can deliver up to 65 GPH.
-
This condensate pump is ideal for collecting and removing condensate from air conditioning equipment, dehumidifiers, high efficiency furnaces, condensing boilers, and other equipment where an automatic drain pump is required.
-
This condensate pump for furnace is built to last, with a stainless steel motor shaft and thermal overload protected motor. It is CSA certified to US and Canadian standards.
-
This condensate pump has three 1/8-inch diameter inlet openings that allow multiple appliances to use it.
-
This condensate pump is designed for furnaces, and can move up to 65 gallons of water per hour. It has a maximum water temperature of 140 degrees Fahrenheit and comes with a 6-foot power cord.
Little Giant VCMA-15ULST 115 Volt, 65 GPH, 1/50 HP Automatic Condensate Removal Pump with Safety Switch and Tubing, Black/White, 554415
Key Features:
-
This condensate pump features a vertical-type switch to reduce its footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers.
-
This is a condensate pump for a furnace that has a thermally protected motor. The motor is 1/50 HP, 1 Amp, 60 Watts, 115 Volts, 60 Hz, and is fan-cooled. The pump is CSA listed in the USA and Canada.
-
This condensate pump for furnace is built to last, with a stainless steel motor shaft and thermal overload protected motor. It is also CSA certified to US and Canadian standards.
-
This condensate pump for furnace includes a safety switch and 20-ft vinyl tubing. The safety switch can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
-
This condensate pump is designed for use with furnaces. It has a 1/50 HP motor and can move 65 gallons of water per hour at a 1-foot head. It has a 15-foot shut-off and a maximum 6.5 PSI. It includes a safety switch and 20-ft. tubing.
DIVERSITECH CP-22 Diversitech Cp Series Condensate Removal Pump, 12X6X6-3/4″, 120 Volts
Key Features:
-
This condensate pump is designed for durability, meaning it can withstand extended use without breaking down. This makes it an ideal choice for a furnace, as it will be able to continuously pump out condensation without needing to be replaced frequently.
-
This condensate pump is used to remove water from furnaces. It has a model number of CP-22.
-
This condensate pump for furnace is 11.799999987964″ long, 6.799999993064″ wide, and 6.199999993676″ tall.
-
This condensate pump is for a furnace and it weighs 5.1 pounds.
Supplying Demand CP115 SPCP115 HVAC/R Condensate Pump with Alarm 1/10HP 115VAC
Key Features:
-
The condensate pump is a high quality pump that is designed to remove condensate from AC systems, condensing furnaces and boilers, ice machines, drinking fountains, and coolers. These pumps incorporate an audible alarm, and an overflow switch that can be used to shut down the system.
-
A condensate pump is a device used to remove condensate (water) from a surface or piece of equipment.
-
This condensate pump is designed for furnaces and has a lift of 22 feet and a flow rate of 10 GPH. It also has an independent NC safety switch and motor switch, as well as a quick-connect terminal for easy connection.
-
The condensate pump for furnace is a specially designed device that eliminates leaks and features a safety float. It also has vibration-absorbing feet and metal side mount tabs that are 11-1/2 inches on center. Additionally, it has three inlet holes and comes with a 6-foot power cord.
-
This condensate pump is designed for use with furnaces. It has a maximum temperature of 110° F and a tank capacity of 1/2 gallon. It has a discharge of 3/8 inch and a frequency of 60 Hz. It also has a motor overload protector and is UL listed. The dimensions are 5 inches wide x 11-1/4 inches long x 7-1/4 inches tall.
Beckett Corporation BK171TUL (Replaces CB151TUL) Medium Condensate Pump with Safety Switch and Tubing, 115V, 17 Foot Max Lift, Black
Key Features:
-
This condensate pump is designed for furnaces and can lift up to 17 feet. It is 115 volts and 60 hertz. The new version of Beckett’s CB151TUL.
-
This condensate pump for a furnace is easy to install because it has a bullseye level, a twist lock check valve, a lift to test tab, and multi-slot mounting brackets.
-
This condensate pump for furnace is user friendly because it has 4 inlet drain holes and a safety switch is included.
-
This condensate pump is designed to automatically start and stop when needed, and includes a thermal protection feature to help prevent damage to the motor.
-
This condensate pump is designed for reliability, with a large tank capacity to pump out more water per cycle. It includes 20 ft. of 3/8″ ID PVC tubing.
Little Giant 554550 VCMX-20ULST 115 Volt, 84 GPH, 1/30 HP, Automatic Condensate Removal Pump, 6-Ft. Power Cord, Safety Switch, Blue
Key Features:
-
The condensate pump for furnace is a device that removes water from the air in your home. It is designed to be used with a furnace, and it features a safety switch, a 1/3-gallon ABS plastic tank, and a 6 ft. power cord. This condensate pump can remove up to 84 gallons of water per hour.
-
The condensate pump is designed for collecting, detecting, and automatic removal of condensate from air conditioning equipment, dehumidifiers, high efficiency furnaces, condensing boilers, and other equipment where automatic drain pump is required.
-
This condensate pump is made with a stainless steel motor shaft and a galvanized steel tank cover. The motor is thermally protected and UL and CSA listed. It includes three 1-1/8” diameter inlet openings and has a maximum water temperature of 140°F.
-
This condensate pump is designed for use with furnaces. It includes a safety switch which can be used to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow. The discharge is a 1/4″ FNPT or 3/8″ O.D. barbed tubing adapter.
-
This condensate pump for furnace is 1/30 HP, 115 Volts, 60 Hz., 1.5 Amps, 93 Watts, 3/8-inch discharge, check valve included, 84 GPH at 1-ft. lift, 21 ft. shut-off, maximum 9.1 PSI.
Little Giant 554405 65 GPH Condensate Pump with Safety Switch, White, VCMA-15ULS
Key Features:
-
This condensate pump for furnace is a Little Giant Automatic Condensate Pump that features a safety switch, 1/2-gallon ABS plastic tank, and 6-foot power cord. This 1/50 HP pump can pump up to 65 GPH.
-
This condensate pump is ideal for collecting, detecting, and automatic removal of condensate from air conditioning equipment, dehumidifiers, high efficiency furnaces, condensing boilers, and other equipment where an automatic drain pump is required.
-
This is a condensate pump for a furnace that is built to last. It has a stainless steel motor shaft and is thermal overload protected. It is also CSA certified to US and Canadian standards.
-
The condensate pump for furnace includes a safety switch which can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
-
This condensate pump for furnace is a 1/50 HP, 115 volt, 1 amp, 60 watt pump with a 3/8-inch OD barbed discharge. It has a maximum flow rate of 65 GPH at 1-foot head, and a maximum shut-off head of 15 feet. It also has a maximum water temperature of 140 F, and includes a safety switch.
Diversitech – GID-SX-0463110 CP-22T Condensate Pump, 120 V, 4 Inlet Holes, 22′ of Lift, RED/Black, 12-1/4X7-3/4X9 in
Key Features:
-
This condensate pump is designed to automatically remove condensate or water discharge from HVAC/R equipment that is up to 22 feet tall. It is 120 volts and comes with a built in safety float switch to help prevent overflow.
-
A condensate pump for furnace with a built-in overflow switch is designed to protect against damage by shutting the system down before there is a problem.
-
This condensate pump for furnace has a removable check valve that prevents backflow and makes cleaning quick and easy.
-
This condensate pump for furnace is easy to install with its shatterproof stainless steel hang tabs and hole-and-slot design. There are also 4 inlet holes to make installation even simpler.
-
The Ideal Size condensate pump for furnace is the perfect size for your HVAC/R equipment. It measures 9.35″ x 7.85″ x 12.25″.
Refcenter Condensate Removal Pump RTP20WS115V,Automatic Snap-action Switches, 1/2 Gallon Rustproof, High Impact ABS tank
Key Features:
Condensate Pump For Furnace FAQs
1. What is a condensate pump for furnace?
A condensate pump for a furnace is a device that is used to remove any condensation that may have collected in the furnace. This condensation can cause a number of problems, including rusting of the furnace and the formation of mold. The condensate pump will remove this condensation and prevent these problems from occurring.
2. How does a condensate pump for furnace work?
A condensate pump for furnace is a device that helps to circulate the water that is produced when the furnace is in operation. The water is then pumped out of the furnace and into a drain or sump pit.
3. What are the benefits of using a condensate pump for furnace?
A condensate pump for furnace can help to improve the overall efficiency of the furnace by removing water from the system that would otherwise be wasted. Additionally, it can help to lengthen the life of the furnace by preventing rust and corrosion.
4. How do I choose the right condensate pump for furnace for my home?
There a few things you’ll want to consider when choosing a condensate pump for your furnace. The first is the size of the pump. You’ll want to make sure that the pump is large enough to handle the amount of water your furnace produces. The second is the type of pump. There are two main types of condensate pumps – submersible and inline. Submersible pumps are more common, but inline pumps may be a better choice for your home if you have a lot of space restrictions. The third is the features of the pump. You’ll want to make sure that the pump has features that are important to you, such as an automatic shut-off or a low-level indicator.
5. How do I install a condensate pump for furnace?
Most condensate pumps come with easy to follow installation instructions. Generally, you will need to attach the pump to the drain line coming from your furnace using a short section of PVC pipe. Once the pump is in place, you will need to plug it in to an outlet and make sure that the float switch is properly positioned.
Conclusion
There are many great condensate pump for furnace on the market. Our list of the best condensate pump for furnace will help you save time researching and choosing the best one for you.