Best Condensate Pump For Dehumidifier 2024

The condensate pump for dehumidifier is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers. It features a vertical-type switch to reduce footprint.

This condensate pump for dehumidifiers has a 1/50 HP motor that is fan-cooled and CSA listed in the USA and Canada. It also has a 1 Amp, 60 Watt, 115 Volt, and 60 Hz rating.

This condensate pump for dehumidifier is made with a stainless steel motor shaft and a thermal overload protected motor. It is also CSA certified to US and Canadian standards.

This condensate pump for dehumidifiers comes with a safety switch and 20-foot vinyl tubing. The safety switch can be used to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.

This condensate pump is designed for use with a dehumidifier. It is 1/50 HP, 115 volts, 1 amp, 60 watts, and has a 3/8-inch OD barbed discharge. It has a maximum flow rate of 65 GPH at 1-foot head, and a maximum shut-off of 15-foot. It also has a maximum water temperature of 140 F, and comes with a safety switch and 20-ft. tubing included.

This is a pump that is designed to remove condensation automatically from boilers, furnaces, air conditioners, and dehumidifiers. It has a vertical-type switch to reduce its footprint, and is designed to be used with these types of devices.

This product is a condensate pump for a dehumidifier. It has a high performance motor that is thermally protected and fan cooled. It is also CSA listed in the USA and Canada.

This condensate pump for dehumidifier is built to last with a stainless steel motor shaft and thermal overload protected motor. It is CSA certified to US and Canadian standards.

This condensate pump for dehumidifiers includes a safety switch and 20-ft vinyl tubing. The safety switch can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.

This condensate pump for dehumidifier has a 3/8-inch OD barbed discharge, 80 GPH at 1-foot head, 20 foot shut-off, up to 8.7 PSI, 3 inlet drain holes, and 6-foot cord. The maximum water temperature is 140 degrees Fahrenheit. It is equipped with a safety switch and 20-ft. tubing is included.

This is a condensate pump for a dehumidifier. It features a 1/2-gallon ABS plastic tank, and 6-foot power cord. The pump has a 1/50 HP motor that delivers up to 65 GPH.

This condensate pump is ideal for collecting, detecting, and automatic removal of condensate from air conditioning equipment, dehumidifiers, high efficiency furnaces, condensing boilers, and other equipment where an automatic drain pump is required.

The condensate pump for dehumidifier is built to last with a stainless steel motor shaft and thermal overload protected motor. It is also CSA certified to US and Canadian standards.

The pump has three inlet openings, each 1/8-inch in diameter. This allows multiple appliances to use the pump simultaneously.

This condensate pump for dehumidifier is 1/50 HP, 115 Volts, 1 Amp, 60 Watts, 3/8-inch OD barbed discharge, 65 GPH at 1-foot head, 15-foot shut-off, maximum 6.5 PSI, 3 inlet drain holes, 6-foot cord; maximum water temperature: 140 F.

This condensate pump for a dehumidifier is designed to be mini and exquisite. It is suitable for A/C 1-5HP (3700W) power, has a flow rate of 40l/h, and a discharge head of 33ft. The pump has a plug connection, and the brown live wire and blue neutral wire need to be connected. There is also a black signal wire, but it does not need to be connected.

This condensate pump for dehumidifier is super quiet and energy-saving. It adopts 100-220V wide voltage design and works so quiet, below 18 db, suitable for any indoor environment. No power consumption during standby.

The condensate pump for dehumidifier is a professional design for HVAC, Air Conditioner, Dehumidifier, Furnance, Ice Maker, and other equipment where an automatic drain pump is required. It is simple and quick to install, and will not damage the original house decoration.

This condensate pump for dehumidifiers uses new probe induction technology to automatically remove water, avoiding issues caused by the displacement of the float or the magnetism.

This condensate pump for dehumidifier has a quality guarantee, so shoppers can feel confident about the product. Additionally, if they are not satisfied with the product, they can choose to replace it or get a refund.

This is a condensate pump for a dehumidifier. It features a safety switch, a 1/2-gallon ABS plastic tank, and a 6-foot power cord. It can pump up to 65 GPH.

This condensate pump is ideal for collecting, detecting, and automatic removal of condensate from air conditioning equipment, dehumidifiers, high efficiency furnaces, condensing boilers, and other equipment where an automatic drain pump is required.

The condensate pump for dehumidifier is built to last with a stainless steel motor shaft and thermal overload protected motor. It is also CSA certified to US and Canadian standards.

This condensate pump for a dehumidifier has a safety switch which can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.

This condensate pump is a dehumidifier that is 1/50 HP, 115 Volts, 1 Amp, and 60 Watts. It has a 3/8-inch OD barbed discharge, 65 GPH at 1-foot head, 15-foot shut-off, maximum 6.5 PSI, 3 inlet drain holes, and 6-foot cord. The maximum water temperature is 140 F and the safety switch is included.

This condensate pump is designed to remove water from a dehumidifier automatically. It features a safety switch, a 1/3-gallon ABS plastic tank, and a 6 ft. power cord. The pump has a 1/30 HP and can pump 84 gallons of water per hour.

This condensate pump is ideal for removing condensate from air conditioning equipment, dehumidifiers, high efficiency furnaces, condensing boilers, and other equipment where automatic drain pump is required.

The STAINLESS STEEL MOTOR SHAFT is a vertical-type pump that features a stainless steel motor shaft and galvanized steel tank cover. The thermally protected motor is UL and CSA listed. It includes three 1-1/8” diameter inlet openings. The maximum water temperature is 140°F.

This is a condensate pump for a dehumidifier that includes a safety switch. The safety switch can be used to shut down the air conditioner condenser or it can be wired to an alarm to warn of a possible tank overflow. The discharge from the pump is a 1/4″ FNPT or 3/8″ O.D. barbed tubing adapter.

This condensate pump for dehumidifier is a small, powerful pump that can move up to 84 gallons of water per hour. It has a check valve to prevent backflow, and a maximum shut-off of 21 feet.

The condensate pump for dehumidifier is a small and exquisite wall-mounted device that is suitable for A/C 1-3HP power. It has a flow rate of 24l/h and a discharge head of 33ft.

This condensate pump for dehumidifier is super quiet and energy-saving. It has a wide voltage design of 100-220V, 3w power, and is suitable for any indoor environment. There is no power consumption during standby.

This condensate pump is designed to work with HVAC, air conditioner, dehumidifier, and furnace systems. It is wall-mounted for easy installation and has a professional design that will not damage your home’s decoration.

This condensate pump for dehumidifiers uses new probe induction technology instead of float induction, which prevents abnormal drainage caused by the displacement of the float or the loss of magnetism.

The condensate pump for dehumidifier is made with high quality materials and is designed to last. Additionally, if you have any issues with the product, you can choose to either replace it or get a refund.

This condensate pump is designed to automatically detect and remove condensation from dehumidifiers, furnaces, or AC units. It features a 1/20 HP high-performance motor that can create up to 18 feet of lift, making it ideal for collecting condensation from heating systems and transferring it to appropriate drainage equipment.

This condensate pump is designed for use with air conditioners, dehumidifiers, or furnaces. It features synchronous motor technology for quiet operation and durability, and is encapsulated with epoxy to withstand water and moisture exposure.

This condensate pump is designed to be used with a dehumidifier in order to prevent water damage from excess condensation. It features a built-in safety switch that can be optionally wired into a connected air conditioner, furnace, or dehumidifier. If the connected unit is producing too much condensation, the safety switch will shut the connected unit’s power off.

This condensate pump is easy to install and is perfect for new and replacement applications. It is versatile and has a 3/8″ discharge hose. It is also perfect for AC units, boilers, and furnaces in basements.

This condensate pump for dehumidifiers is designed to help keep basements dry by pumping out water that has collected in the basement. The pump is easy to install and is made in the USA using domestic and imported parts.

This condensate pump for dehumidifiers is ideal for shallow pan condensate removal from dehumidifiers and portable air conditioners. It does not come with a collection tank.

This condensate pump for a dehumidifier has a permanently lubricated motor with no required maintenance and an oil-filled design to maximize heat dissipation. The motor is 115-volt, 1/150 HP, 60 Hz, 1.1 amps, and 70 watts.

The condensate pump for dehumidifier is an automatic pump that turns on when the water reaches 1-3/4 inches and shuts off when the water falls to 1-1/4 inches. It will operate in most standard condensate drain pans.

This condensate pump for dehumidifier is built for durability with an epoxy-coated cast aluminum pump housing and motor cover, nylon volute and impeller, and nitrile shaft seal. The stainless steel switch bracket is removable for easy cleaning, and the inlet filter screen catches debris to keep the pump running smoothly.

This condensate pump for dehumidifiers can move up to 205 gallons of water per hour, has a 4.3 PSI pressure, and comes with a 9-foot cord. It can handle intermittent water temperatures up to 120 degrees Fahrenheit and includes a 90 degree 1/4-inch MNPT adapter that fits 1/2-inch I.D. vinyl tubing.

This condensate pump for dehumidifier has a 1/50 HP thermally protected fan cooled 115 Volt motor with automatic operation and stainless steel motor shaft.

The shopper is looking at a condensate pump for a dehumidifier that can move up to 88 gallons per hour and has a max head of 18 vertical feet.

This condensate pump for dehumidifier has a 3/8″ barbed discharge with built in check valve, and a 1/2 gallon collection tank with four 1-1/8″ inlet openings and removable caps.

The pump has two functions- it can be either open or closed. It has 8″ lead wires.

This condensate pump is for dehumidifiers and comes with wall mount tabs and a 6′ power cord.