If you have a water heater with a pilot light and your water is warmer than you like, you probably have a hot water heater with an electric ignition. If so, you can easily convert it to a hot water heater with a match ignition. If you have a gas water heater and your water is too hot, installing a tank jacket can help cool the water.
If you have a water heater with a pilot light and your water is colder than you like, you probably have a hot water heater with an electric ignition. If so, you can easily convert it to a hot water heater with a match ignition.
If you have a gas water heater and your water is too cool, installing a tank jacket can help warm the water. If you have an electric water heater and your water is much cooler than you prefer, you can easily adjust the temperature by installing a water heater temperature regulator.
If you want to make sure your hot water heater will last as long as possible, look
Our Editor’s Best Hot Water Heater For Well Water Reviews
Corro-Protec™ Powered Anode Rod for Water Heater, 20-Year Warranty, Eliminates Rotten Egg/Sulfur Smell within 24 hours, Stops Corrosion and Reduces Limescale, Electrical Anode Rod Made of Titanium
Key Features:
-
This is a hot water heater that is designed to eliminate odors caused by hydrogen sulfide. It has an advanced powered anode rod that helps to remove the odor-causing particles from your water.
-
The hot water heater is designed to protect against corrosion from hard water. It replaces the hex head anode rod in your 40-89-gallon water heater and can help defend against any level of water hardness.
-
The hot water heater is designed to be energy efficient by reducing mineral accumulation on the tank. This can help improve the water quality while reducing stress on the tank to reduce energy costs.
-
This hot water heater comes with an anode rod that is easy to install.
-
This hot water heater anode rod is manufactured in Canada and is backed by a 20-year warranty. It is designed to extend the life of your tank.
About Fluid Aluminum Zinc Replacement Anode Rods for Water Heaters (Aluminum ZINC Complete KIT)
Key Features:
-
The hot water heater is designed to eliminate the embarrassing rotten egg smell in your home by using an Aluminum/Zinc Alloy anode rod instead of a magnesium anode rod.
-
This is a hot water heater for well water that is designed to fit almost all types of water heaters. It comes with a 1-1/16” deep well socket, pipe sealing Teflon tape, and an anode rod.
-
This is a hot water heater for well water that comes with printed instructions and a brass cap. The instructions are written by plumbers and translated for everyday problem-solvers. The brass cap is placed on the drain after installation to keep floors dry.
-
The hot water heater is a rod that is hinged into four segments. It is less than 12 inches long each. It can be easily lowered into your water heater. If the overall length is a little too long, you can cut it shorter with a hacksaw. You will need a ½ inch ratchet or breaker bar, a few common hand tools, and a friend to help you.
-
This is a hot water heater for well water that is designed to last longer by having an anode rod that erodes instead of the tank.
3M Aqua-Pure Whole House Scale Inhibition Inline Water System AP430SS, Helps Prevent Scale Build Up On Hot Water Heaters and Boilers
Key Features:
-
This hot water heater uses polyphosphates to help inhibit the build-up of mineral scale in pipes and water-using appliances.
-
This hot water heater for well water helps protect your water-using appliances and fixtures from scale build-up and corrosion. By reducing these problems, your appliances and fixtures will last longer.
-
This hot water heater is designed to help reduce the amount of scale build-up in your water supply by injecting polyphosphates into the water. It does not filter the water, but instead just reduces the amount of scale that can build up over time.
-
This hot water heater has a feature that helps reduce scale build-up by inhibiting the build-up of hardness minerals onto metallic surfaces. Additionally, the polyphosphates help reduce corrosion by forming a thin protective layer on the inner-surface of pipes.
-
The hot water heater is designed to maintain efficiency by preventing scale build-up on the heating elements. This will help to keep your water heater running efficiently for a longer period of time.
-
The hot water heater is easy to replace and the water cartridge is easy to change out, making system maintenance easier.
-
The AP430SS provides high flow rates of up to 10 gpm (37.9 lpm) when installed with 3/4” NPT inlet/outlet connections. It is designed for use with well water and features a durable stainless steel construction.
-
This is a hot water heater designed to be used with a well water system. It includes two fittings for connecting to a cold water line, but additional parts and tools are required for installation and are not included.
-
The hot water heater is for well water and the shopper is responsible for reading the instructions carefully and measuring the cold water line feed pipe before installation.
-
The hot water heater is designed to bind calcium and magnesium hardness minerals, preventing them from precipitating out of solution and building up on metallic surfaces. This will help extend the life of the hot water heater and keep it running smoothly.
-
This hot water heater for well water contains Siliphos, a 100% pure food grade scale inhibitor approved by the USDA. This product will help to prevent the build-up of scale in your hot water heater, keeping it working efficiently for longer.
-
This hot water heater is designed for well water and features a stainless steel head. It is a durable and long-lasting option that will provide hot water for your home.
-
This hot water heater has a flow rate of 6 gallons per minute, making it ideal for well water. It is also durable and has a long lifespan, making it a great investment for your home.
-
This hot water heater is designed for use with well water, and has a maximum operating temperature of 100F.
thermomate Mini Tank Electric Water Heater ES250 2.5 Gallons Point of Use No Wait for Hot Water Under Kitchen Sink 120V 1440W, Wall or Floor Mounted
Key Features:
-
This is a mini tank water heater that will provide instant hot water to the user. It has a fast recovery time and an adjustable temperature range.
-
This hot water heater is designed for easy installation, and can be wall or floor mounted under sink or counter. It plugs into a standard 120V outlet.
-
This water heater is made with Incoloy 800 Stainless Steel, which is excellent at resisting corrosion and handling and transferring heat at high temperatures. It has a heating efficiency of up to 99%, and will not scale. This will enhance the water heater’s lifespan and durability.
-
This is a hot water heater that is designed for well water. It has an enamel coating that is designed to improve insulation and prevent leaking. It also has a CSA T&P relief valve that is designed to ensure a safe and long service life.
-
This is a hot water heater for well water that is 12.95″H x 12.95″W x 11.5″D, 15.4 lbs, with 1/2″ NPT water connections, 1.44 kW at 120 volts, and a plug-in connection with 2 feet power cord. It has a max water pressure of 150PSI and nominal current of 12A. It has a 3-year Limited Warranty for the tank, 1-year warranty for parts and 24hours customer service.
EcoSmart ECO 11 Electric Tankless Water Heater, 13KW at 240 Volts with Patented Self Modulating Technology
Key Features:
-
This hot water heater is an on-demand water heater that will never run out of hot water. It is continuously monitored for water temperature and flow rates to ensure efficiency and consistent performance.
-
The EcoSmart tankless electric water heater is a space-saving, wall-mounted unit that can also be installed at the point of use. It is 90% smaller than traditional tank heaters, and its dimensions are 11.5 x 8 x 3.75 inches.
-
This hot water heater is more efficient than a traditional tank heater, because it only heats water when it’s called upon. This means that there is no wasted energy keeping water hot when it’s not being used.
-
The EcoSmart ECO 11 tankless electric water heater is ideal for providing hot water for a bathroom, small sink, office breakroom and other point-of-use or low-flow applications. It provides between 1.3 and 3.1 gallons-per-minute depending on the inlet water temperature.
44″ Aluminum Zinc Anode Rod, Eau Get Rid of Rotten Egg Smelling Flexible Water Heater Anode Rod for GE, Rheem, Reliance,Kenmore Water Heater Including 1-1/16″ Hex Socket Tool and Teflon – Upgraded
Key Features:
-
This is a hot water heater for well water that is designed to eliminate the rotten egg smell from the water tank. It is made of high-quality aluminum zinc alloy and has a sacrificial anode rod that is key to its function.
-
This is a 44-inch long anode rod that is hinged into four parts. Each part is less than 12 inches, so it can be easily replaced even in a narrow space. Just cut it shorter with a simple hacksaw.
-
This is a kit to replace the anode rod in a hot water heater. The anode rod is responsible for extending the service life of the water heater tank by preventing corrosion. This kit comes with the anode rod, Teflon sealing tape, and a 1-1/16″ chrome finished socket.
-
This is a hot water heater for well water that will fit almost all models that use a standard ¾” NPT Anode Rod Connection.
-
The hot water heater is designed to be easily replaced and to last a long time. It is made to be regularly replaced and to decay instead of your water heater. An anode rod is used to keep the water heater from rusting and cracking.
Frost King SP60 All Season Water Heater Insulation Blanket, 3” Thick x 60” x 90”, R10, Silver
Key Features:
-
This hot water heater for well water has an item weight of 7.0 lb.
-
This hot water heater is made in the United States.
-
The Frost King hot water heater is a great choice for well water. It is a durable and reliable model that will provide you with hot water for many years to come.
-
This is a hot water heater that is meant to be used with well water. It is 90.0 inches long, 3.0 inches wide, and 60.0 inches tall.
Water Heater Blanket Insulation, “NON FIBERGLASS”, Fits up to 80 Gallons, Energy Star Certified, Satisfaction Guaranteed
Key Features:
-
This water heater is designed to be used with well water and is advertised as being able to save the user money and energy, as well as help the environment. The water heater is five millimeters thick.
-
If you are in the market for a new hot water heater, and are looking for a model that is both efficient and will save you money in the long run, this may be the perfect option for you. This hot water heater has an R-value of 7.1, meaning it will reduce heat loss by 40%. Additionally, it is estimated that you will recover your investment in just a few months – making it a wise choice for anyone looking to save money and energy.
-
This water heater is designed to fit all 20 to 80 gallon tanks and can be used with either gas or electric water heaters.
-
This water heater is easy to install and easy to clean, and it doesn’t contain any fiberglass. It’s also non-toxic and non-carcinogenic.
Aluminum Zinc Water Heater Anode Rod; Hex Head; 3/4 NPT x 44-inch; Stops Sulfur/Rotten Egg Smell (Solid)
Key Features:
-
This is a sacrificial anode rod for a water heater tank that is made from an aluminum-zinc alloy. It is used to cure a rotten egg (sulfur) smell in hot water.
-
This is a replacement anode rod for a water heater tank, specifically for one that uses magnesium. It is hex-headed.
-
This hot water heater is designed to eliminate the rotten egg smell often caused by hydrogen sulfide gas, and extend the overall life of the water heater tank.
-
The hot water heater for well water is a 44-inch long solid/continuous anode that can be cut to length to fit different size heaters.
-
This hot water heater is not recommended for use with a water softener. Instead, it should be used with a powered anode/cathode.
Turbo Tank Cleaner – Water Heater Hard Water Sediment DIY Cleaning Tool
Key Features:
-
This is a hot water heater for well water that promises to extend the lifetime of your water heater, improve its efficiency, reduce your energy bill, and increase your hot water supply.
-
The hot water heater is designed to work well with water that has sediment in it. The Turbo Tank Cleaner breaks up the sediment so that it can be flushed out of the system, leaving you with clean, hot water.
-
This product is a hot water heater that can be used for all types of water heaters, gas and electric. It is not for tankless water heaters.
-
The hot water heater has a clear housing, which allows the user to see the sediment removal process.
-
This is a quick and easy hot water heater for well water that can be installed through the tank’s drain valve hole. There is no need to drain the tank, and it works with any cordless drill and standard garden hose.
-
This hot water heater is durable and has been improved to be more rugged. It is made of ABS plastic and has stainless steel reinforced threads.
Hot Water Heater For Well Water FAQs
1. What are the most common problems with hot water heaters for well water?
The most common problems with hot water heaters for well water are sediment build-up and corrosion.
2. What are the signs that my hot water heater for well water needs to be replaced?
There are several signs that your hot water heater may need to be replaced, including:-Your hot water heater is more than 10 years old.-You have high water bills.-Your hot water heater is leaking.-Your hot water heater is making strange noises.
3. How often should I have my hot water heater for well water serviced?
There is no definitive answer to this question as it will depend on the specific type and make of your hot water heater, as well as the quality of your well water. However, as a general guideline, it is generally recommended that you have your hot water heater serviced at least once every two years.
4. What are the benefits of having a hot water heater for well water?
Some benefits of having a hot water heater for well water may include having a reliable and efficient way to heat water, as well as having a unit that is specifically designed for well water. Additionally, a hot water heater for well water may provide an extended lifespan for the unit, as well as increased safety features.
5. How do I choose the right size hot water heater for well water for my home?
The size of the hot water heater will depend on the number of people in your household and the number of bathrooms in your home.
Conclusion
There are many great hot water heater for well water on the market. Our list of the best hot water heater for well water will help you save time researching and choosing the best one for you.